Skip to main content

NetworkLayerStats

Breakdown of activity at network layer

Keys​

Each entry in this counter group is keyed by the protocol field from the IP packet header, represented in hexadecimal format. This field identifies the next-level protocol used in the data portion of the IP datagram.

KEYPROTOCOLDESCRIPTION
06TCPTransmission Control Protocol
11UDPUser Datagram Protocol
01ICMPInternet Control Message Protocol
29IPv6IPv6 encapsulation
2FGREGeneric Routing Encapsulation

Counter group​

GUIDTYPEBucke Size (secs)Topper Bucket(Secs):
{E89BCD56-30AD-40F5-B1C8-8B7683F440BD}Native60300

Meter list​

IDDESCRIPTIONTOP COUNTBOTTOM COUNTTYPEUNITSDESCRIPTION
0Total100VT_RATE_COUNTERBpsThis meter reports the total bandwidth, in bytes per second, for this network layer protocol.
1Packets100VT_COUNTERpktsThis meter reports the total number of packets for this network layer protocol.
2Active Flows100VT_RUNNING_COUNTERflowsThis meter reports the number of concurrently active flows for this network layer protocol.
3Total Flows100VT_COUNTERflowsThis meter reports the total number of flows seen for this protocol.
4Into Interface100VT_RATE_COUNTERBpsThis meter reports the bandwidth for this protocol ingressing the specified interface, when used with Interface Trackers.
5Outof Interface100VT_RATE_COUNTERBpsThis meter reports the bandwidth for this protocol egressing the specified interface, when used with Interface Trackers.
6Unused Cardinality counter2020VT_GAUGEUniquesThis is a reserved gauge slot intended for a unique value cardinality metric. It is not currently mapped to any field for this counter group, so it remains an inactive placeholder with no data populated.
7Unused Cardinality counter2020VT_GAUGEUniquesThis is a second reserved cardinality gauge slot with the same status as meter 6. It is inactive and not instrumented for this group.
Interface Tracking NetFlow

Meters 4 and 5 (Into Interface and Outof Interface) are created when a filtered counter group is set up with the parent counter group as Network Layer Stats and the filter as a NetFlow Router Interface. In that configuration, these meters represent the ingress and egress network layer protocol metrics for that specific interface.